Risam Sharpening Stone 1000/6000 Grit

Medium Sharpening Stone - High Grit 1000/6000 RISAM® 1000/6000 sharpening stone is polycrystalline, made of excellent quality corundum (Al2O3) and ensures excellent results. Used on high hardness knives and at a small angle between 8 ° - 20 °. The hard side is suitable for use on slightly sharpened knives and recreates a sharp angle. The fine side of 6000 grit is used to smooth the corner and create an even sharper corner. Equipped with non-slip base for maximum safety during use. Instructions for use: Soak the stone in water for 5 minutes and then place it on a firm base. The use of one side or the other depends on the size of the blade problem. STEP 1 Start by pushing the knife up and down, without much pressure. During the process, the angle between the knife and the stone should be between 8º and 20º. With proper use, you will repeat the above procedure in about 2 to 3 months. STEP 2 Repeat the same process with the fine side of the stone, applying less pressure this time. The fine side helps to eliminate chips and ensures a smooth and bright blade. Under Normal Conditions, The Use Of The Fine Side Is Per Month, Or Even Shorter, Depending On The Use. STEP 3 Clean the knife with a cloth and the stone with a brush, to remove the shavings. Leave it outdoors until it is completely dry.